Zirconia ceramic structural parts are widely used in our lives because of their superior performance advantages.

The decoupling of zirconia ceramics has special optical properties, and the reflectivity to ultraviolet long wave, medium wave and infrared is as high as 85%. After the coating is dried, the nanoparticles tightly fill the gaps between the coatings to form a complete air insulation layer, and its own low thermal conductivity can force the heat transfer time in the coating to be longer, so that the coating also has a lower thermal conductivity. thermal conductivity, which can improve the thermal insulation performance of the coating.

Reflective thermal insulation coating, the main component is nano-zirconia particles, the thermal conductivity is extremely low, which can increase the indoor temperature by more than 3 degrees in winter, the thermal insulation inhibition rate can be increased by 90%, the energy saving rate can reach more than 80%, and the water droplet on the wall can be completely solved. Mildew phenomenon occurs.

As we all know, zirconia ceramic structural parts are ceramic products that are sintered and sintered with zirconia material. As its application becomes more and more extensive, many machinery industries will use zirconia ceramics as the tool parts they need. So how to test zirconia ceramic parts? Let me introduce to you below.

1. First, observe whether the hardness and wear resistance of the zirconia ceramic structural parts are up to standard, as well as the thermal conductivity, chemical stability and corrosion resistance.

2. The refractory performance of zirconia ceramics must reach at least a high temperature of one thousand degrees Celsius;

3. Zirconia ceramic parts must have good chemical stability, and the corrosion resistance of acid should be high under high temperature;

4. The last is the density of the product and whether the compatibility between organisms is up to standard.

The above four points are the precautions for the inspection of zirconia ceramic structural parts, so we need to pay special attention to each step. Only products that have undergone layer-by-layer tests can ensure excellent quality, and it is worth using this product with confidence.